| Customization: | Available |
|---|---|
| Logo Printing: | With Logo Printing |
| Usage Times: | Non-Disposable |
|
Still deciding? Get samples of US$ 20/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Professional Teeth Bleaching Kit Dental Whitening Kit Hydrogen Peroxyde Teeth Whitening Gel 35% Teeth Whitening Gel
Dental Teeth Whitening Kit 35% HP Bleaching Gel Set for Personal Teeth Whitening
FEATURE
- 1. The teeth must be cleaned ( by ultrasonic cleaning) and irradiated with violet light for 3 minutes;
- Endogenous pigmentation (mild tetracycline tooth, etc.)
- 2. Apply gingival protectant and irradiate it with blue light until curing, which takes 1-2 minutes;
- 3. After curing, apply the desensitizer (on the surface of the tooth ), keep 5 minutes (no light is needed) and drop directly;
- 4. Apply the whitening agent, wipe off the whitening agent after 10 minutes of blue light irradiation, and then irradiate again with blue light for 10 minutes (repeat three times) . or irradiate with blue light for 15 minutes, then wipe off the whitening agent and repeat twice for irradiation with blue light for 15 minutes;
- 5. Use red light for 3-5 minutes, and then use purple light for 3-5 minutes;
- 6. Rinse the patient's mouth.
1.Before the procedure begins, the dentist should do an oral examination and record the medical history. Patient with preexisting periodontal disease and/or exposed root surfaces and with chipped or cracked enamel,ref to protocol) are notcandidates for this tooth whitening treatment
2.Do scaling and polishing if required .(ref to protocol)mIake preoperative photographs
4)In case of stains being present on the teeth, polish the teeth with the polishing powder (Jet polisher). Make sure the teeth arelry and cover soft tissues with wet cottongauze before jet polishing.
5.Apply Vaseline onto the patient's lip and exposed soft tissue. Eye protection glasses to be put on the patient. Use cool pack ifpatient is comfortable to use it and then put on protective glasse
6)Insert cheek retractors, making sure that they are a comfortable fit for the patient using cotton rollsTEtch the target teeth for 10-15 secsWash the etchant with copious amount of water and dry the teeth completely89Apply gum protector to the gingival margins & cure it for 30 - 40 secs
10) Add the hydrogen peroxide into the powder and mix to an even consistency using the micro brush. Use the brush to applythe mixed gel onto the target teeth, 2-3 mm thick
11) Position the light in such a way that the light of the system is 5 mm away from the teeth, timing it to 8 min cycle12) After 8 min move the light away and remove/wipe out gel from the teeth surface and from in between the teeth using smallcotton balls, ( DO NOT RINSE) Check with the patient for any sensitivity or burning sensation. Discontinue the cycle ifpatient is too uncomfortable.
13) Repeat to a maximum of 3 whitening cycles as per requirement of shades14) Remove the cotton roll and gum protector, Take out the retractors and remove the eye goggles, then rinse teeth with water. Besure there is no gel remaining between the teethn.15)Do post operative polishing with the polishing paste and brush.16) Apply desensitizer as per requirement.17)Take post operative photographs.
Cautions:
Keep refrigeratedKeep away from reach of childrenStore away from heat and lightNot suitable for pregnant women
){kind=link}